Vacuum Dewatering System

JAYEM Vacuum Dewatering System is for having high quality long strip casting of floors at an affordable cost. It removes excess water from the green concrete by vacuum process enabling the water-cement ratio to reduce drastically. The wet concrete is compressed by atmospheric pressure and the excess water is squeezed out of the concrete by the vacuum-dewatering. The system, bringing compactness to the concrete also improves the compressive strength, density and the resistance to water penetration.

Results

1) Concreting of an area of 200- 300 sq.m. can be done in 8- 10 hours using this system.

2) Reduction in W/C ration leads to early setting and high strength.

3) Increase in compressive strength of concrete by 40-70%..

4)Surface hardness of the slab increases by 150%.

5) Surface abrasion resistance increases by 130%.

6)Water absorption is reduced enormously.

7)Minimum dusting.

8) Level Floor, High Flatness Accuracy.

9)Minimized crack formation, Shrinkage reduced by 50%.

10)Earlier Utilization of floor.

11)Lower Production cost.

12)No curling defect in floors.

13)High and early strength minimizes damage on newly cast floors.